Antistatic floor

February 13th, 2009

Antistatic floor is mainly made up of hard-wearing HPL, PVC panels or laminate wood plank, steel panel, electrostatic spray painting and pedestals. PVC strips are not needed around the edge of steel panel. The bottom is mainly made up of cold rolled steel sheet. The surface of the steel panel is mainly made up of horniness steel sheet which. The surface is phosphatized during the electrostatic process. And the panel is spot welded. The top grade of this type of floor can work well over 15 years. With nice look, high loading capacity and strong antistatic ability, this type of flooring is widely used at high grade office building, network room, computer laboratory, telecommunication building and television transmitter control room.

The features of antistatic floor are as follows:

1) Precise structure, high mechanical strength, strong load ability and strong shock resistance
2) Convenient to install, interchange and maintain
3) Fire, water and corrosion proof

Posted in Related product info | No Comments »

Steel & Ceramic Antistatic Raised Floor

February 12th, 2009

Steel & ceramic antistatic raised floor is made up of ceramic tile, antistatic steel panel, 4 pieces of PVC strips, stringers, locks, pedestals and shock absorption pad. The ceramic tile offers a beautiful look. This type of raised floor is noncombustible, permanent antistatic, strong impact resistant and easy to maintain. The dimensions of this product can be 600mm*600mm*32mm, 550mm*550mm*35mm and 500mm*500mm*30mm. It offers strong rolling load performance, excellent electrical & grounding continuity, and ultimate load performance. And the problem of fireproof has been completely solved with this type of products. This type of antistatic floor is widely used at office building, clean computer room and super market.

Tags:
Posted in Related product info | No Comments »

D type perforated access floor

February 11th, 2009

The specifications of D type perforated access floor are as below:

1) Dimensions: 500 x 600 x 30mm, 600 x 600 x 35mm
2) The top and bottom surfaces are of cold-rolled steel sheets which are welded.
3) The top surface has been coated with epoxy powder which is already phosphoresced
4) The inside of the panel is hollow and full of steel cross support ribs
5) The 4 pedestals for each panel are locked at the corner, so each piece of this type of access floor is freestanding.
6) The pedestals are vertically adjustable.
7) Perforated rate: around 19%
8 ) The range Concentrated load: 850lbs, 1,050lbs, 1,250lbs, 1,550lbs, 2,050lbs, 2,550lbs, 3550lbs.

Posted in Access floor | No Comments »

OA intelligent raised access floor

February 10th, 2009

OA intelligent raised access floor can even work dependently with just 1 piece as every panel is held by 4 pedestals. The double surfaces of the panel are made of particularly hard steel sheets. The top surface is coated with anti-static materials. The bottom sheet is galvanized. The panel is filled with foamed cement. The height of the pedestal can be adjusted. The adjustable height is between 20mm and 135mm.And the pedestal will lock automatically after the adjustment.

The features of OA intelligent raised access floor are as below:

1) Easy to install, change and maintain
2) Enough wiring space
3) Durable, compact and reusable
4) Strong impact resistant, strong wearing resistant, corrosion proof
5) Comfortable to walk
6) nice to look
7) Suitable for clean office building, super market, hospital, clean computer room, high grade classrooms, etc.

Tags:
Posted in Related product info | No Comments »

Calcium sulphate raised floor

February 9th, 2009

Calcium sulphate raised floor is made up of high abrasion resistant HPL or PVC overlay, calcium sulphate or mineral high-density fiber base, galvanized bottom panel, conductive black electric rubber sides, pedestals and stringer . The HPL can be with wood texture and the color of ceramic tile. It is of good interchanging, strong fireproofing and strong load capacity. Also it is waterproof, antistatic and antimagnetic. It is one of the most popular types of raised floor. Its dimensions are usually 600*600*28mm and 500*500*32mm. It is widely used at, satellite earth stations room, office building, computer room, television transmitter control room, hospital, marketplace and other places.

Tags:
Posted in Related product info | No Comments »

Type No.98682 raised access floor

February 8th, 2009

The specfications of Type No.98682 raised access floor is as below:

1. Cover: HPL, laminate flooring, bamboo flooring or PVC
2. Stuff: cement or wood core
3. Bottom: galvanized aluminum panel or steel panel
4. Edge: covered by PVC strips
5. Size: 500*500*32mm, 600*600*35mm
6. Concentrated load: 2970N, 5590N
7. Weight of floor: 17kg
8. Pedestal height: Adjustable. Its usual height is between 130mm and 310mm.
This type of raised access floor is widely used at large-or-medium sized computer room, office room and hospital such as program-controlled telephone switchboard room, television transmitter control room, information administration center room and so on.

Posted in Related product info | No Comments »

Heavy type ventilation access floor

February 7th, 2009

Heavy type ventination access floor is widely applied at center control computer room , equipment computer room and computer classroom with the air supply devices.

Its features are as below:

1. The ventilation rate can be 52% and meet the various requirements to purify the related environment;

2. Its veneered surface is strong antistatic and fire proof;

3. The panel of this type of access floor is full of ventilation holes to for ventilation purpose. But it is of strong antipollution.

4. Strong load-bearing capacity, high mechanical strength and high performance of impact resistance.

5. It is strong moisture resistant.Thought there are many ventilation holes on it, it is still strong damp resistant after the special technology treatment.

Tags:
Posted in Access floor | No Comments »

Bamboo flooring VS bamboo colored laminate flooring

February 6th, 2009

Now there is a kind of laminate flooring with bamboo color(L). And it looks like bamboo flooring(B) very much. But both of them have their own advantages.

1. Price
L is much cheaper than B. L is mainly made up of high density fiber board instead of hardwood. So its price is much lower.

2. Color
The color of bamboo colored laminate flooring(L) is from the decorative paper which is imitated from the real bamboo flooring(B) with computer. The color of L is usually vertical natural or carbonized in vertical direction. Anyway it can’t be as vivid as the real color of B. And B offers many other looks with strand woven and stained types. The stain type offers various looks due to the different types of lacquer and paint technology.

3. Dimension
The size of L is usually 1213*193*8.3mm and 1213*193*12.3mm. And the size of B is usually 960*96*15mm. So it is easy to recognize the real B with the dimension if you are familiar with bamboo flooring.

4. Foot feel
The foot feel of B is much better than that of L even L is  12mm thick or with attached underlay. L is mainly made up of high density fiber board. People feel hard when stepping on it. And there is some noise when people walk on it as it is of a “floating” type. B is usually 14 or 15mm thick. And it is mainly made up of bamboo strips. So it offers better foot feel and thus make house more valuable.

Besides, laminate flooring is much more abrasion resistant as its first layer is mainly made up of alumina which is main material of diamond. But bamboo flooring contains less formaldehyde.

Tags:
Posted in Bamboo flooring | No Comments »

How to remove the scratches on raised floor?

February 5th, 2009

Scratches are often found on raised floor. Below are some ways to remove the scratches in terms of the specific surface type.

1. If the surface is of steel panel, the same type of lacquer can be used to paint and cover the scratches.

2. If the surface is of wood, the panel should be replaced with new one to get rid of the scratches.

3. If the surface is of HPL, ceramic tile or PVC type, the inter material is the same as the surface, the scratches don’t affect the look of raised floor too much. It is better to use brush to make the scratch and the neighboring area looks the same.

Tags:
Posted in Related info | No Comments »

Half raised floor and half bamboo flooring for one room?

February 3rd, 2009

Someone plans to change the decorative material for his room. He is going to install half area with raised floor and half area with bamboo flooring for one room. And he wonders if there is any problem with it. In fact, his idea is workable as long as some points are noted.

Surely the area of raised floor(R) will be higher than that of bamboo flooring(B). Some accessories such as reducer or end cap should be used on the transition space to cover the subfloor and the edge of each area to make floor even and offer a beautiful look.

The size of R is fixed. And it is hard to cut R to adjust the size of floor. B can be cut at vertical direction or transversal direction to fix the area. So it will be much better to install R first since its unit size is fixed.

Posted in Related product info | No Comments »

« Older Entries
Newer Entries »