The panel sizes of type 5896 PVC Surface raised floor is 600*600*42mm. The thickness of PVC tile is 1.2mm. The main material of the PVC tile is resin. The tiles offer a marble appearance. The PVC particles from the tiles form a static transmission network. The 2 steel sheets are spot welded and then epoxy coated. The cavity of the panel is filled with pure cement. The panel is supported with snap-on stinger system. Its height can be adjusted between 8cm and 200cm. Its concentrated load is 3000kgs. Type 5896 PVC Surface raised floor meets CNS and C. I. S. C. A. It is widely used in, data center, computer room and control room.
Type 5899 wood core access floor
April 12th, 2009The sizes for the panel of Type 5899 wood core access floor are 550*550*33mm. The wood core is made of MDF. The back and surface of the wood core are covered by zinc plated steel sheets. The thickness of the steel sheets is 7mm. The 4 sides of wood core are protected with black plastic strips. The top of the panel is covered with strong wearing resistant PVC tiles which thickness is 3mm. The panel is supported with stringer bolt understructure system. Type 5899 product is of a heavy type for the field of wood core access floor. And it offers better foot feel. It is widely used in high grade classroom, hotel and computer room.
Type 6123 raised perforated floor
April 2nd, 2009The panel of type 6123 raised perforated floor is die-cast with aluminum material. So the panel is handy, light, strong impact resistant, waterproof and strong anticorrosion. The stringers under the panel prevent magnetic disturbance and improve the anti-earthquake proof performance. This type of perforated floor is supported with corner-lock freestanding understructure system. Its pedestal is with aluminum head. The ribs(axles) are placed in the tube of pedestal to improve its loading performance. Its axle loading is around 7200kg with the pedestal height of 70cm. The open ratio can be between 18% and 55% to meet various perforated purpose. It is widely used at computer room, high grade classroom, high grade hotel and telecommunication center.
Type 5961 type access floor
March 27th, 2009The panel surface of type 5961 access floor has been painted with epoxy resin. The dimensions of the panel is Each piece of panel is put on 4 aluminum headed pedestals. The rubber cushions are placed between the pedestal and panel for shockproof purpose. Then the panel is fixed on the pedestal with screw at the corner lock holes. So each piece of panel for type 5961 access floor is freestanding. The stringers are anti-rust. Its pedestal is vertically adjustable. Its axial load is 2300kgs. Its distributed load is 27150N/M2
Why does bamboo flooring warp?
March 15th, 2009Sometime the problem of warp happens on bamboo flooring. There are several possible reasons for the problem:
1. Bamboo flooring(B) is affected by air humidity. The water content of B must be low for dry area, while it should be comparably higher for damp area. B will possibly warp if the air humidity is quite different from the water content of B.
2. The gaps haven’t been kept among each plank during installation. 0.2mm gap must left there for expansion purpose. Otherwise the planks are easy to warp when they expand.
3. There was no gap kept between wall and B during the installation. Or the gap is too little. The gap should at least 5mm wide, otherwise warps is easy to happen.
4. Expansion space hasn’t been kept in big room during the installation. Expansion space must be kept if the installation area is over 9m*10m. The related accessories such as T-moulding or reducer can be used to cover the expansion space.
5. B is dunked in water. Bamboo flooring is strong moisture resistant. But it is not water resistant. If the planks are dunked in the water from kitchen or washroom for a long time, it will expand in big sizes and warp.