The structure of No.D9153 wood core raised floor is similar with other kind of raised floor except for the panel. The top and bottom of surfaces for the panel are mainly made up of steel sheets. And the cavity of the panel is fitted with flake board. The bottom steel sheet has been galvanized. The 4 sides of panel are covered by plastic conductive strips. The panel dimensions are 550*550*42mm. Its top surface can be covered by HPL, PVC, carpet, laminate flooring or other floor covering materials. Its concentrated load is 2250N. And it uniformed load is 10100N. No.D9153 wood core raised floor is waterproof and corrosion proof. It is widely used in bank, high grade hotel, smart offices, computer room, etc.
Archive for the ‘Related product info’ Category
No.D9153 Wood Core Raised Floor
Thursday, March 5th, 2009Tags: raised floor
Posted in Related product info | No Comments »
No.D3286 ceramic raised access floor
Wednesday, March 4th, 2009No.D3286 ceramic raised access floor is made up of ceramic tile, cement infilled panel, shock absorbtion pad, locking system and pedestal. First, the cement infilled panel is installed with locking system, shock absorbtion pad and pedestal. Then the ceramic tile is fit on the panel. The ceramic tile is with the design of red rose. It seems as if people walked on lots of rose when he stepped on the floor. The panel is made up of high quality cold-rolled steel sheets and foamed cement. The sheets have been punched, spot-welded and coated with epoxy powder. No.D3286 ceramic raised access floor is strong impact resistant. Its concentrated load can be 11KN. It is especially suitable for control center, bank, computer room and high grade hotel.
Tags: Access floor, raised access floor
Posted in Related product info | No Comments »
No.D6328 perforated raised floor
Tuesday, March 3rd, 2009No.D6328 perforated raised floor is made up of perforated panel, damper, stringer, bolt system, shock absorbtion pad and pedestal. The loading ability of the perforated panel is weakened for common perforated raised floor as the top and bottom sheet is full of ventilation holes. But No. D6328 type floor is equipped with special reticulated steel grid at the cavity of the panel. So it is strong impact resistant. The type of products can just be installed on the space where ventilation is necessary instead of all room fit with this type of floor. The air flow rate can be adjusted as the damp is equipped with the panel. The rate can be 15%,23%,27%,37% and 52%.
Tags: raised floor
Posted in Related product info | No Comments »
The pedestal system for OA raised floor
Sunday, March 1st, 2009The pedestal system for OA raised floor is made ups of pedestal, shockproof cushion and screw. The size of the top plate for the pedestal is 73*73*4mm. And the size of the bottom plate for the pedestal is 104*104*4mm. The diameter of the tube is 25cm. The height of the diameter is 30cm. The height is adjustable between 10cm and 30cm. The pedestal is plated with zinc to ensure corrosion proof. The top of the head is made of aluminum. The screw is used to fix each corner of the panel. So each panel can be freestanding with the help of corner lock system. The shockproof cushion is used to reduce noise when people work on it. With the help of the support system, OA raised floor is durable and widely used at net work room and office building.
Tags: raised floor
Posted in Related product info | No Comments »
No.9658 raised net floor
Saturday, February 28th, 2009No.9658 raised net floor is with special slot at the edge of panel. It is a brand new design! Its surface is treated with static painting. The 4 corners of the panel are locked. Each panel can be free standing. The dimensions of the panel can 600*600*30mm and 600*600*35mm. Its dimensions are of high precision. The tolerance of panel thickness is between 0.25mm. And The length and width tolerance is between -0.35mm and 0.05mm. The color of the panel can be white, gray and black. And the surface is strong corrosion resistant and strong impact resistant. It is waterproof and waterproof. The panel is easy to install, change and disassemble. There is screw under the panel and fit on the pedestal. The height of the panel can be lowered with adjusting the screw. No.9658 raised net floor is widely used at office building and computer room.
Tags: net floor
Posted in Related product info | No Comments »
Anti-Static Cement infilled raised access floor
Monday, February 23rd, 2009The panel of anti-static cement infilled raised access floor is made of cold pulled steel sheet. The panel size can be 500*500*28mm or 600*600*32mm. The four edges of the panel are riveted. The cavity of the panel is full of foamed cement. The exterior of the panel of is antirust, phosphoreted and treated with epoxy powder coat. Its features are strong abrasion resistance, strong electric conduction, high bearing strength, smooth surface, strong corrosion proof and strong shock proof. The loading capacity can be 850LB, 1100LB and 1300LB. The product is widely used in all kinds of high grade office building, computer rooms, network room, laboratory, electrical control rooms, post and telecommunication centers and television transmitter control room.
Tags: raised access floor
Posted in Related product info | No Comments »
Square-head pedestal for access floor
Saturday, February 21st, 2009Square-head pedestal for access floor is made up of head, axis, base and gasket. It is usually zinc coated. The thickness of head is around 4mm. The material of head can be aluminum alloy or steel. The thickness of base is around 3mm. The size of top is around 60*60mm. And the size of bottom is around 80*80mm. The gasket mainly consists of black rubber. It is put on the top of the head to reduce the noise when people step on the access floor. The pedestal is used to support the stringer system and corner locking system. It can be self-locked. The pedestal is vertically adjustable. And height range is from 120mm and 180mm. The axis load can reach 25kn. The minimum load capacity of the pedestal is 22,000N.
Tags: Access floor, pedestal
Posted in Related product info | No Comments »
Case wiring raised floor
Friday, February 20th, 2009Case wiring raised floor is made up of pedestal, stringers, locks, shock absord pad and foamed cement infilled panel with slots at the edge. PVC or HPL layer can be put on its top to offer a more beautiful look. Its main feature is its slots for wire. Various wires for volume, video and data can be installed in the slots in parallel. The wire put in the slots can reach any place of floor in the room. Wire pipes are not needed in this way and accordingly the cost is saved. Case wiring raised floor offers a beautiful look as the wires are hidden under floor. The pipes installed above the floor greatly affect the look of room. And the wires are easy to maintain. Open the slot cover and then the wire is easy check, repair or replace. Its height is adjustable as the height of pedestal can regulated. It’s suitable for office building and computer room.
Posted in Related product info | No Comments »
Antistatic floor
Friday, February 13th, 2009Antistatic floor is mainly made up of hard-wearing HPL, PVC panels or laminate wood plank, steel panel, electrostatic spray painting and pedestals. PVC strips are not needed around the edge of steel panel. The bottom is mainly made up of cold rolled steel sheet. The surface of the steel panel is mainly made up of horniness steel sheet which. The surface is phosphatized during the electrostatic process. And the panel is spot welded. The top grade of this type of floor can work well over 15 years. With nice look, high loading capacity and strong antistatic ability, this type of flooring is widely used at high grade office building, network room, computer laboratory, telecommunication building and television transmitter control room.
The features of antistatic floor are as follows:
1) Precise structure, high mechanical strength, strong load ability and strong shock resistance
2) Convenient to install, interchange and maintain
3) Fire, water and corrosion proof
Posted in Related product info | No Comments »
Steel & Ceramic Antistatic Raised Floor
Thursday, February 12th, 2009Steel & ceramic antistatic raised floor is made up of ceramic tile, antistatic steel panel, 4 pieces of PVC strips, stringers, locks, pedestals and shock absorption pad. The ceramic tile offers a beautiful look. This type of raised floor is noncombustible, permanent antistatic, strong impact resistant and easy to maintain. The dimensions of this product can be 600mm*600mm*32mm, 550mm*550mm*35mm and 500mm*500mm*30mm. It offers strong rolling load performance, excellent electrical & grounding continuity, and ultimate load performance. And the problem of fireproof has been completely solved with this type of products. This type of antistatic floor is widely used at office building, clean computer room and super market.
Tags: raised floor
Posted in Related product info | No Comments »