China bamboo flooring | Access floor | Raised floor » Access floor

How to choose raised access floor?

admin — Thu, 29 Oct 2009 11:09:10 +0000

1. Choose wood core type raised access floor if better foot feel is preferred. Unlike China laminate flooring, the surface of wood core is not strong abrasion resistant. So the surface should be covered with antistatic HPL or PVC which is strong wearing resistant. Choose HPL, PVC or carpet covered type if more beautiful look is required for the type of cement infill panel. Choose perforated type if ventilation for the floor is preferred. Choose OA type if lots of wire or cables need to be used on the floor. Don’t choose wood core type if water resistance is required.

2. Set the weight of the heaviest facility in the computer room as the minimum loading capacity to avoid the damage of raised access floor during its daily use. Be familiar with the required specifications such as the concentrated load, uniform load, ultimate load, system resistance and wearing resistance to make sure the selected floor meet each standard.

3. The surface of raised access floor should be strong abrasion resistant, strong moisture resistant, anti-slip, environmentally friendly, strong corrosion resistant and clean. The pedestal can be adjusted to the required height. Check the length, width and thickness of panel to see it meet the requirement. Check the pedestals to see if they are fully galvanized if galvanization is required.

4. Calculate the total indoor area of the room and then work out the necessary quantity of raised access floor and related accessories such as cable box, lifter, pedestal, stringer, etc.

Type 8563 chipboard access floor

admin — Sun, 10 May 2009 02:16:00 +0000

The dimension of the type 8563 chipboard access floor is 550*550*38mm. The density of the chipboard is 780kgs/m3. Its formaldehyde release can meet E1 standard. The top and bottom of the chipboard are wrapped with 3mm thick zinc plated steel sheet. Its surface is covered with HPL tile. The edge of the panel is covered with injection molded conductive PVC strips. It is supported with stringers, bolt, pedestal and shock absorbtion pad. The height can be adjusted between 15cm and 60cm. Type 8563 chipboard access floor is antiskid, fireproof, soundproof and anti-oil. It is especially suitable for computer room and high grade classroom.

Type 8791 all steel access floor

admin — Mon, 27 Apr 2009 07:32:13 +0000

The panel size of type 8791 all steel access floor is 550*550*40mm. Its top is galvanized steel sheet which is 1.5mm thick. And its bottom is aluminum sheet which is 1.6mm thick. The cavity of the panel is filled with concrete. The top of the steel panel is covered with 2mm thick conductive PVC tile. The 4 edges of the PVC tile is packed with galvanized steel sheet. The height of height can be adjusted. And the pedestal can be self-locked. The whole support system has been zinc plated. Its concentrated load is 800ib. Type 8791 all steel access floor is widely used for computer room, classroom and labs.

Type 5899 wood core access floor

admin — Sun, 12 Apr 2009 10:23:20 +0000

The sizes for the panel of Type 5899 wood core access floor are 550*550*33mm. The wood core is made of MDF. The back and surface of the wood core are covered by zinc plated steel sheets. The thickness of the steel sheets is 7mm. The 4 sides of wood core are protected with black plastic strips. The top of the panel is covered with strong wearing resistant PVC tiles which thickness is 3mm. The panel is supported with stringer bolt understructure system. Type 5899 product is of a heavy type for the field of wood core access floor. And it offers better foot feel. It is widely used in high grade classroom, hotel and computer room.

Type 5961 type access floor

admin — Sat, 28 Mar 2009 00:20:34 +0000

The panel surface of type 5961 access floor has been painted with epoxy resin. The dimensions of the panel is Each piece of panel is put on 4 aluminum headed pedestals. The rubber cushions are placed between the pedestal and panel for shockproof purpose. Then the panel is fixed on the pedestal with screw at the corner lock holes. So each piece of panel for type 5961 access floor is freestanding. The stringers are anti-rust. Its pedestal is vertically adjustable. Its axial load is 2300kgs. Its distributed load is 27150N/M2

No.1879 type OA access floor

admin — Sat, 14 Mar 2009 07:39:49 +0000

No.1879 type OA access floor is made up of panel, stringers and pedestal. The size of the panel is 500*500*32mm. The surface of the panel has been treated with static painting. Its ivory color offers a nice look. The double outlet boxes are installed in each panel for wire layout purpose. The pedestal is with aluminum head. The four corners of the panel is fixed to prevent the panel from sliding. Its structure is with high precision. The deflection is less than 1.5mm. It is widely used in classroom, office building and high grade hotel.

No.E9646 type access floor

admin — Wed, 11 Mar 2009 08:26:43 +0000

No.E9646 type access floor consists of high-pressure laminates, steel panel, stringers, locking system and pedestal. The laminates are with the designs of 3 strips beech. The sizes of the steel panel are 60*60*42mm. Grid metal framework is installed in the cavity of the panel. The pedestal height of no.E9646 type access floor can adjusted between 30cm and 70mm. The wire tank of this type of products can work with video line, volume line, power line, water pipes and air conditioning pipes. These pipes and lines can reach any place of the floor. Its concentrated load is around 7KN. It is widely used in computer room and laboratory.

No.8921 type access floor with calcium sulphate panel

admin — Tue, 10 Mar 2009 08:06:12 +0000

No.8921 type access floor consists of calcium sulphate panel, steel sheet and pedestal. The calcium sulphate panel is 32mm thick. Its density is 1600g/cm3. Its dimension is 550*550*35mm. The panel is suitable for wide range of temperature due to its high density. And there is little sound when there is step on the floor. The steel sheet on the back of the panel has been galvanized. The 4 edges of the panel is stuck with PVC strips. Its height can be adjusted. No.8921 type access floor is fireproof, corrosion proof, strong impact resistant, easy to install. Also it offers a nice look.

No.D5689 type OA intelligent access floor

admin — Sun, 08 Mar 2009 12:55:21 +0000

The each panel of No.D5689 type OA intelligent access floor is supported with 4 pieces of pedestals. And each panel is freestanding. Each pedestal supports the edges of 4 pieces of panels. The upper board of the panel is made of extra-hard steel sheet which has been treated with antistatic coating. And the bottom of the panel is made of deeply pulled steel sheet. Its base support has been galvanized. Its height can be adjusted which range is between 20 and 160mm. No.D5689 type OA intelligent access floor has enough space for wiring. The wire in the tank can reach any space of the floor. Its surface is covered with PVC tiles which look like beech colored laminate flooring.

No.D9860 OA access floor

admin — Mon, 02 Mar 2009 07:52:21 +0000

No.D9860 OA access floor is specially designed for easy cable layout in computer room and net work room. The panel is mainly made up cold rolled steel sheets. And the steel sheets are well spot welded. The surface has been treated with antistatic coating and can be covered with HPL and PVC flooring. There are wire tank at the 4 sides of panel. Video line, volume line, data line and power line can be installed in the tank to offer a better look. Its support system is made up of grid stringer, corner lock, pedestal, shock absorbtion pad, screw and bolt. The pedestal is with manufactured with some special technology. No.D9860 OA access floor can be ultra-low. Its height can only be 8cm. So it can offer a bigger room space.