China bamboo flooring | Access floor | Raised floor

HPL access floor is strong abrasion resistant, fireproof, easy to clean and easy to maintain. And it doesn’t require to be waxed. It is widely used at hospital, computer room, satellite earth stations room, office building, computer room, program-controlled telephone switchboard room and marketplace, television transmitter control room. HPL tiles must be bonded to the next nether floor surface such as aluminum or steel section to offer the rigidity and load-bearing performance. The concentrated load of HPL access floor can be 800lbs, 900lbs,1250lbs,1350lbs and 1550lbs.

Thickness of HPL: 0.8mm-3mm
Dimensions: 1200*2540mm ,600*600mm,
Abrasion Resistance: 4000 anti-wearing turns is available
Surface Finish:  matte surface, low light
Colors: oak, cherry, walnut, teak, applewood, maple, pine, beech, granite, winter gray, marble, ceramic tile, beige starlite,etc.

 PVC conductive tile is used both for access floor and other types of flooring. This product is permanent anti-static due to the conductive static network made up of plastic particles. It has various designs such as marble, granite, ceramic tile, bamboo, cherry, walnut, teak, apple wood, pine, maple, oak, mahogany, etc. It is strong abraision resistant, waterproof and fireproof. The part are the same as whole-steel access floor: full welded steel shell filled with cement, pedestal, screw and stringers. Its sizes are 600*600*30mm and 600*600*28mm.

Perforated access flooring is without foamed cement inside. The top and bottom metal panels and upper cover of the product are all punched with ventilation holes. And the ventilation rate of the product is between 18%-32%. The damper is used for adjust the air flow. Perforated access flooring is widely used for the place where ventilation is required under the floor such as satellite earth stations room, office building, computer room, program-controlled telephone switchboard room. Type: Aluminum series and Steel series(bare series) Size: 600 x 600 x 35mm( steel series), 600x 600 x 40/50mm(Aluminum series )

Access floor can be dividened into 5 types.

1. Full steel antistatic type

Stucture: 1. Surface: HPL or PVC covering; 2. Steel shell infilled with cement; 3. Zinc plated steel pedestal
Installation height: more than 100mm(normal height: 150mm/200mm/250mm)
Dimensions: 600*600*30/35mm
Features: better antistatic and carrying capacity and faster installation.
Suitable places: equipment computer room, cener control computer room, computer classroom, etc.

2. Aluminium alloy antistatic type
Structure: 1.Strong abrasion resistant HPL or PVC layer; 2. full aluminium panel; 3. Zinc plated steel pedestal
Installation height: more than 80mm(normal height: 150mm/200mm/250mm)
Dimensions: 600*600*35/40mm
Features: better antiseptic, longer life time and luxury apperance.
Suitable places: electric workshop such as electromagnetism screen workshop and micro-electronics workshop.

3. Ceramice surface antistatic type
Structure: full steel panel, ceramic surface, zinc plated steel pedestal
Dimensions: 600*600*30/35mm,  500*500*30/35mm
Installation height: more than 80mm(normal height: 150mm/200mm/250mm)
Features: Strong wearing resistance, longer life time, luxury look.
Suitable places: government office, OA computer room.

4. Perforate type
Stucture: Its structure is similar with full steel type. But its lumen is hollow instead of filled with cement. There is blowhole on the top surface, upper and down steel panel.
Features: ventilated rate: 20%-40%. The ventilated rate can be adjusted between 0-40%.
Dimensions: 600*600*30/35mm
Suitable places: computer room, control room of broadcasting station, electronic equipment installation workshop, etc.

5.  Woodcore panel type
Structure:  high density flakeboard, high abrasion resitant veneer, electric strip around 4 sides, aluminium foil.
Features: nice look, strong durability, antistatic, waterproof, fireproof, electronmagnetism proof, etc.
Suitable places: library, electric reading room, computer room, etc.